The Most Effective Way to Replace Your Clutch

It might be argued that clutch replacement is a matter of skill. You can develop these skills through experience or you might actually go through a training process. If you make mistakes when installing or replacing the clutch, then it will cost you a lot of money down the road. Instead you should concentrate on the possibilities of saving money and working according to a plan. These changes will improve your rate of return. They will also mean that you are in the best position to develop effect strategies for your vehicle. The use of technical services should not detract from the fundamental functionalities that you are undertaking. You need a good manual especially if your experiences in the subject are rather shaky. It is better to humbly submit to the manual than to make glaring errors that will take years to correct.

Lubrication is the key to success

You need to ensure that there is lubrication in the right places when you undertake clutch replacement. You also need to ensure that you do not place the grease in the wrong places. This will make your work very difficult and might even stall the process of trying to complete the task quickly. A light coat will be put on the shaft and the collar to release the slides. You need a coat on the shaft splines in order to keep the rust away. It is important that you do not put grease on the clutch disc or the flywheel. The pressure plate does not require greasing.

Resurfacing the flywheel

It is important that you resurface the flywheel as you perform clutch replacement. You should not take the looks of the flywheel as the final arbitrator on replacement. Instead you need to ensure that it is done as a matter of course. There are just a few dollars involved and yet the risk of further damage is quite high. If you fail to resurface the flywheel then you could end up with a chattering clutch. This is in no way an ideal situation to deal with the problem. It is important that all these things are dealt with as a matter of urgency in order to prevent the vehicle from suffering long term damage.

The pilot bearing and bushing

One of the aspects of clutch replacement that need attention is the replacement of bushing or pilot bearings. You might require a special puller tool. If that is not possible then you can use the cavity behind the bearing and then utilize the wooden dowel. It is possible to replace grease with play dough or even silly putty. Some really innovative car owners have even been able to use old bread. It is up to you to decide on the most convenient method of achieving the objective of replacing the clutch.

Work gently

There is no point in forcing anything as you do the clutch replacement. This is a process that should be relatively straightforward if you take the time to study the task before the actual performance. You need to look at the sliding parts to ensure that they are not creaking from the pressure. The bellhousing bolts in particular do not require too much pressure in order to give way. If you use too much force then you might end up damaging the car. The use of force might also indicate that you are not really conversant with the process that you are trying to achieve on a long term basis. Check the results for accuracy and functionality.