How to Replace a Bumper Bracket or Side Support
By Shenron on Dec 26, 2010 with Comments 0
The following guide will teach you How to Replace a Bumper Bracket or Side Support. Follow the instructions below.
Things You’ll Need:
- Bumper Bracket
- Drill
- Screwdriver
- Socket Extension Set
- Socket and Ratchet Set
- Trim Panel Removal Tool
- 3/8 in. Drive Ratchet
Estimated Costs
- DIY Costs: Est. $71.96 parts only
- Shop Costs: Est. $383.22 parts and labor

Image may not be specific to your car.
Instruction
Here are given the simple steps to replace your bumper bracket or side support without much trouble.
- Using a door trim panel tool, unfasten the clips/screws holding the bumper cover in place. You may need to access the clips/screws from inside the wheelwell. Take the bumper cover away from the vehicle. Place the bumper on a safe place to prevent any damage to it.
- Detach any wires or connectors from the bumper like fog lights, etc.
- On right and left side of the vehicle under the fender, you will find bumper brackets or side supports. Unfasten the two bolts holding the bumper brackets.
- Examine the area around the bumper brackets for any signs of damage.
- Take new bumper brackets and install them on their respective places. Secure them with bolts.
- Replace the bumper cover on the bumper brackets and secure it with the clips/screws. Make sure that all the clips/screws are tight enough.
Filed Under: Guides/DIY